Manual installation

An ISO image for creating the standard installation medium (e.g., a USB flash drive as described below) is available on the Airlock Gateway download page on Techzone.

 
Info

Alternative installation for servers without a USB interface: You can mount the Airlock Gateway ISO image remotely using a Virtual Media feature (for example, iLO on HPE servers or iDRAC on Dell servers). For details, refer to your server management controller documentation.

Prepare a bootable USB flash drive for installation

Prequisites:

  • A USB flash drive with sufficient space for the Airlock Gateway ISO image.
  • This article uses Fedora Media Writer.
  • The ISO image downloaded from the Airlock Gateway download page on Techzone. After downloading, verify the checksum.
  • Administration rights on the local workstartion to install and run the media writer software.
 
Notice

Writing an image overwrites the partition table and file system structures on the USB flash drive, erasing any existing data.

USB flash drive preparation with Fedora Media Writer on Windows:

  1. Insert the USB flash drive into a free port on your workstation.
  2. Start the Fedora Media Writer with administrator rights.
  3. Click Select .iso file.
  4. Verify the checksum.
  5. If the checksum matches the value published on the download page, click Next.
  6. Click Select... and choose the Airlock Gateway ISO image.
  7. Select the target USB flash drive and click Write to create a bootable USB flash drive.
  8. Proceed with following the steps in the On-premises installation quick guide.